Installation Of The Speed Mode And Cadence Mode

Installing the Speed Sensor

TIP: XOSS recommends you secure your bike on a stand while installing the sensor.

1. Place and hold the speed sensor on top of the wheel hub.

2. Pull the strap around the wheel hub, and attach it to the hook on the sensor.

3. The sensor may be tilted when installed on an asymmetrical hub. This does not affect operation.

4. Rotate the wheel to check for clearance.

The sensor should not contact other parts of your bike.

Installing the Cadence Sensor

TIP: XOSS recommends you secure your bike on a stand while installing the sensor.

1. Select the band size that fits your crank arm securely.

2. The band you select should be the smallest one that stretches across the crank arm.

3. On the non-drive side, place and hold the flat side of the cadence sensor on the inside of the crank arm.

4. Pull the bands around the crank arm, and attach them to the hooks on the sensor.

5. Rotate the crank arm to check for clearance.

6. The sensor and bands should not contact any part of your bike or shoe.

Take a 15-minute test ride and inspect the sensor and bands to ensure there is no evidence of damage.