Device Settings In Bike Computer
Left Button:
Long Press: End recording
Short Press: Start/Pause/Resume
Right Button:
Long Press: Power on/off
Short Press: Switch data display
Long press the left and right buttons together(Power on the state):
Enter the setting interface
GPS icon:
Short press the left button after turning on, the GPS icon appears and starts to flash. GPS appears solid with a BEEP prompt to indicate the device is ready.
Up and down triangles on the device screen:
The up triangle means your speed is higher than the average speed, and the down triangle means your speed is lower than the average speed.
Device Settings
Note: It can be set whether it is in recording or has ended.
1. Long press the right button to turn on the device
2. Long press both buttons to enter the setting interface
[Metric/Imperial] [Time Zone]Settings
Metric/Imperial Setting(P1): Press the left button to switch between metric and imperial, and long press the right button to switch to P2.
Time Zone Setting(P2): Press the left button to set a number or option, and press the right button to switch.
*The device sets the time zone, not the current time
*The supported time zone range is: -12:45 to 14:45
*Only for the workout after the setting takes effect
After setup, long press the right button to exit the settings.
Device Settings In XOSS APP
Note: You can only access the settings page of the device in XOSS app after you have finished the record.
After connecting XOSS G Generation to the XOSS app, click Settings to modify the features below.
*User Profile
*Backlight
*Key Tone
*Auto Pause
*Units
*Temperature
*Reset(You can restore the default configuration settings and workout profiles. This will not remove your workouts.)
