XOSS SPRINT | XOSS SUPPORT CENTER

How To Connect XOSS SPRINT To XOSS APP?

1. Install the XOSS app. Android: Google Play Store iOS: App Store 1. Open the XOSS app, sign up, and log in to your XOSS account. 2. Long press the Home button to turn on the device. After the device is turned on, long press the Home button a pop-up menu will show, you can choose 'Sync'. 3. Turn your phone Bluetooth on. Ensure that your Sprint is nearby your phone. 4. On the device home page in the XOSS app, click the "+" sign behind the bike computer, then select Sprint.

Last updated on May 09, 2024

Record & Manage The Workout

Record The Workout Long press the Home button to turn on the device. Go outside, after the device is turned on, long press the Home button a pop-up menu will show, you can choose 'Start'. Start recording the workout after successful positioning. Manage the workout Delete the workout in XOSS app 1. Connect the XOSS SPRINT to the XOSS app 2. Tap Storage 3. Tap Workout Android: - Tap Edit in the upper right corner to select one or the multiple workouts you want to delete. iOS: - Select the workout you want to delete and swipe left to delete it individually. - Tap Edit in the upper right corner to select the multiple workouts you want to delete. Delete the workout in SPRINT Long press the Home button to select Menu Select History Select the workout you want to delete Short press the Home button Select Delete Select Conform Can I Delete A Workout And Upload It Again? If you delete the workout on storage, the workout in your device also was deleted, then the workout can't be restored. Resync the workout 1. Connect the XOSS SPRINT to the XOSS app 2. Tap Storage 3. Tap Workout Android: - Tap Edit in the upper right corner to select one or the multiple workouts you want to resync. iOS: - Select the workout you want to delete and swipe left to resync it individually. - Tap Edit in the upper right corner to select the multiple workouts you want to resync.

Last updated on Jul 12, 2023

Sensor Connection

SPRINT support all speed sensor, cadence sensor, heart rate monitor, and power meter that use ANT+ or Bluetooth 4.0. - Spd&Cad - Speed - Cadence - Heart Rate - Power - eTAP Connect the sensor to SPRINT 1. Long press the home button to select the 'Menu' 2. Select 'Devices' Note: 1. After switching bikes on the computer, it will automatically select its list of sensors, supporting up to three bicycles. 2. When using a speed sensor, you need to set the correct wheel diameter, in order to get the correct speed. 3. Blinking icons indicate it's searching, and constant light indicates connection.

Last updated on Jul 12, 2023

Routebook And Navigation

Import the Routebook to SPRINT 1. Connect the SPRINT and enter the device home page 2. Click 'Routebook'-'Import Routebook'-'Import' Start Navigation 1. Long press the home button to select 'Menu' 2. Select 'Navigation'>Press the down key to select the Routebook you want to import>Press the home button to select 'Loading' 3. Return to the navigation page of the bike computer, you can view the route. 4. Once you start recording, you can use the navigation Delete Routebook Delete it in the XOSS app 1. Connect the SPRINT to the XOSS app 2. Tap Routebook 3. Tap the edit in the upper right corner Delete it in the SPRINT 1. Turn on the SPRINT 2. Long press the home button 3. Select Navigation 4. Select the Routebook you need to delete 5. Short press the home button 6. Select Delete

Last updated on Jul 12, 2023

How To Customize The Data Layout Of SPRINT?

Customize The Data Layout in the XOSS app 1. Long press the HOME button, select Sync 2. Tap 'Data Layout' 3. Tap 'set data' 4. Tap to change the data field Customize The Data Layout in the SPRINT 1. Long press the HOME button, select Menu 2. Select Settings 3. Select Data Fields

Last updated on Jul 12, 2023

SPRINT Cannot Be Searched By XOSS APP?

If your SPRINT cannot be searched by XOSS APP, you can perform some basic troubleshooting steps: - Make sure that your phone's Bluetooth is turned on and that the XOSS APP has obtained the relevant Bluetooth permissions. - Make sure the SPRINT is turned on and in sync mode. - Make sure that SPRINT has been unbound from the Bluetooth of the mobile phone system. - Try toggling Bluetooth off and back on again in your phone's settings.

Last updated on Jun 29, 2023

How To Fully Remove SPRINT?

If your XOSS Sprint is already connected to the XOSS app, you can disconnect the device by following the steps below. 1. Connect XOSS Sprint and enter the device homepage. 2. Click "Remove".

Last updated on May 24, 2024

Battery & Charging

What signs will appear when the bike computer is charging? - When charging, the battery icon on the upper right corner will change from empty to full. - The brightness of the screen while charging depends on whether you have turned on the backlight. - When there are three bars and it doesn't flash, it means charging is completed. My SPRINT Will Not Turn On 1. Plug the device into an external power source using the power/data cable. 2. Press and hold the power button until the device powers off (hold for up to 30 seconds). 3. Release the power button. 4. If the power/data cable does not power the device back on automatically, unplug it from the power source and plug it back in or press the power button. Are the Charging Contact Points in Working Condition? Ensure your cable is not damaged and the charging pins are free of debris, and corrosion, and are all at the same height. Replace the cable if necessary. Check the charging port on the device for damage, debris, or corrosion. Use a pencil eraser or a cotton swab dipped in rubbing alcohol to clean them and allow them to air dry. What Can I Use to Charge the Battery of My SPRINT? Micro USB Cable. We recommend avoiding inexpensive off-brand chargers. Can I Replace the Rechargeable Battery in My SPRINT? SPRINT features a rechargeable, lithium-ion battery that is not user replaceable.

Last updated on Jul 12, 2023

Firmware Update

Premise: The bike computer needs to stop recording 1. Connect SPRINT to XOSS app 2. If it needs to upgrade the new firmware, it will prompt "Update" 3. Tap Update Now

Last updated on Jun 29, 2023

User Profile Settings

1. Connect SPRINT to the XOSS app 2. Tap Settings 3. Tap User Profile(The first time you connect SPRINT will Sync XOSS account information) You can change the athlete information - Gender - Age - Height - Weight Used to calculate calories, power and more. You can change the performance potential - Max Heart Rate - LTHR - FTP Used to set heart rate and power zones. Change Heart Rate Alert Change Speed Alert

Last updated on Jun 29, 2023

Bike Profile Settings

SPRINT supports setting three bicycle information. - Connect SPRINT to the XOSS app - Tap Settings - Tap Bike Profile - You can change the Bike's Name, Wheel Circumference, Bike Weight

Last updated on Jun 29, 2023

Device Settings For SPRINT

Device Settings In Bike Computer Home button In the off state: Long press the Home button to turn on the device Non-off state: Long press the Home button a pop-up menu will show, you can choose Start > start recording Sync > APP connection Menu > menu page Menu Page Long press the home button to select the menu page(Power on the state) - Settings Backlight(Always ON/AUTO/OFF) Data Fields(Customize the data layout in the device) Key Tone(ON/OFF) Auto Pause(ON/OFF) Segment Bike Profile(Select the bike in use on the device) - Devices(Connect the sensor to SPRINT) - Navigation - History(View the date and time of the workout, or delete the workout) - Activities(Only cycling and indoor cycling are supported currently) - System Storage Data Overwrite Language(English/Chinese) Batch Delete About Restore Defaults Device Settings In XOSS APP Note: You can only access the settings page of the device in XOSS app after you have finished the record. After connecting SPRINT with the XOSS app, click Settings to modify the features below. *User Profile *Bike Profile(Support setting three bicycles information.) *Backlight *Language *Units *Time Zone *Reset(You can restore the default configuration settings and workout profiles. This will not remove your workouts.)

Last updated on Jul 12, 2023

Resetting The SPRINT

Restoring the Default Settings You can restore the default configuration settings and activity profiles. This will not remove your history or workouts. 1. Connect the SPRINT to XOSS APP 2. Tap 'Settings' 3. Tap 'Reset'

Last updated on Jul 12, 2023

USB connection

You can connect SPRINT to the computer and get the standard FIT files, when connected the following icon will appear on the screen of SPRINT, the device name is also SPRINT on the computer. Note: You should end the recording before making a USB connection.

Last updated on Jun 29, 2023

How To Add Map Into SPRINT?

1. Connect the SPRINT to XOSS app 2. Tap Map 3. Tap Add Map

Last updated on Jun 29, 2023