Home XOSS G/G+ Device Settings For XOSS G/G+

Device Settings For XOSS G/G+

Last updated on Apr 24, 2024

Device Settings In Bike Computer

XOSS G

The function of the Button

Left Button:

Long Press: End recording

Short Press: Start/Pause/Resume

Right Button:

Long Press: Power on/off

Short Press: Switch data display

Long press the left and right buttons together(Power on the state):

Enter the setting interface

GPS icon：
Short press the left button after turning on, the GPS icon appears and starts to flash. GPS appears solid with a BEEP prompt to indicate the device is ready.

Up and down triangles on the device screen:

The up triangle means your speed is higher than the average speed, and the down triangle means your speed is lower than the average speed.

Device Settings

Note: It can be set whether it is in recording or has ended.

  1. Long press the right button to turn on the device

  2. Long press both buttons to enter the setting interface

  3. [Metric/Imperial] [Time Zone]Settings

Metric/Imperial Setting(P1): Press the left button to switch between metric and imperial, and short press the right button to switch to P2.

Time Zone Setting(P2): Press the left button to set a number or option, and press the right button to switch.

  • The device sets the time zone, not the current time

  • The supported time zone range is: -12:45 to 14:45

  • Only for the workout after the setting takes effect

After setup, long press the right button to exit the settings.

XOSS G+

The function of the Button

Left Button:

Long Press: End recording

Short Press: Start/Pause/Resume

Right Button:

Long Press: Power on/off

Short Press: Switch data display

Long press the left and right buttons together(Power on the state):

Enter the sensor connection page, and continue to short-press the right button to enter the settings page.

GPS icon：
Short press the left button after turning on, the GPS icon appears and starts to flash. GPS appears solid with a BEEP prompt to indicate the device is ready.

Up and down triangles on the device screen:

The up triangle means your speed is higher than the average speed, and the down triangle means your speed is lower than the average speed.

Device Settings

  1. Long press the right button to turn on the device

  2. Long press both buttons to enter the sensor connection page, short press the right button again, and enter into the "Tire Circumference" setting interface.

  3. [Tire Circumference] [Metric/Imperial] [Time Zone]Settings

Tire Circumference Setting(P1): Press the left button to set the number, and short-press the right button to switch to P2.

  • The unit of Tire Circumference is "mm"

  • Wheel Size and Circumference, learn more

Metric/Imperial Setting(P2): Press the left button to switch between metric and imperial, and short press the right button to switch to P3.

Time Zone Setting(P3): Press the left button to set a number or option, and press the right button to switch.

  • The device sets the time zone, not the current time

  • The supported time zone range is: -12:45 to 14:45

  • Only for the workout after the setting takes effect

After setup, long press the right button to exit the settings.

Device Settings In XOSS APP

Note: You can only access the settings page of the device in XOSS app after you have finished the record.

After connecting XOSS G/G+ to the XOSS app, click Settings to modify the features below.

XOSS G

  • User Profile

  • Backlight(Based on local sunrise and sunset times.)

  • Key Tone

  • Auto Pause

  • Units

  • Time Zone

  • Reset(You can restore the default configuration settings and workout profiles. This will not remove your workouts.)

XOSS G+

  • User Profile

  • Bike Profile(Only support setting one bicycle information.)

  • Backlight(Based on local sunrise and sunset times.)

  • Key Tone

  • Auto Pause

  • Units

  • Time Zone

  • Reset(You can restore the default configuration settings and workout profiles. This will not remove your workouts.)