Home XOSS G/G+

XOSS G/G+

XOSS_Support
By XOSS_Support
• 13 articles

Record & Manage The Workout

XOSS G/G+ only supports outdoor cycling, it does not support indoor cycling. Record Workouts 1. Long press the right button to turn on the device. 2. Go outside, press the left button, and wait while the device locates satellites. The satellite bars turn black when the device is ready. 3. Short press the left button to resume/pause. 4. Long press the left button to end the recording. NOTE: Long press the left button to end the recording. The workout is saved automatically and workouts that are too short are not saved. Manage the workout Delete the workout 1. Connect the XOSS G/G+ to the XOSS app 2. Tap Storage 3. Tap Workout Android: - Tap Edit in the upper right corner to select one or the multiple workouts you want to delete. iOS: - Select the workout you want to delete and swipe left to delete it individually. - Tap Edit in the upper right corner to select the multiple workouts you want to delete. Can I Delete A Workout And Upload It Again? If you delete the workout on storage, the workout in your device also was deleted, then the workout can't be restored. Resync the workout 1. Connect the XOSS G/G+ to the XOSS app 2. Tap Storage 3. Tap Workout Android: - Tap Edit in the upper right corner to select one or the multiple workouts you want to resync. iOS: - Select the workout you want to delete and swipe left to resync it individually. - Tap Edit in the upper right corner to select the multiple workouts you want to resync.

Last updated on Jul 12, 2023

Battery & Charging

Battery Specification - Battery:500mAh Rechargeable Lithium Ion - Endurance Time:25 Hours - Micro USB Cable What signs will appear when the bike computer is charging? - When charging, the battery icon on the upper right corner will change from empty to full. - The brightness of the screen while charging depends on whether you have turned on the backlight. - When there are three bars and it doesn't flash, it means charging is completed. My XOSS G/G+ Will Not Turn On 1. Plug the device into an external power source using the power/data cable. 2. Press and hold the power button until the device powers off (hold for up to 30 seconds). 3. Release the power button. 4. If the power/data cable does not power the device back on automatically, unplug it from the power source and plug it back in or press the power button. Are the Charging Contact Points in Working Condition? Ensure your cable is not damaged and the charging pins are free of debris, and corrosion, and are all at the same height. Replace the cable if necessary. Check the charging port on the device for damage, debris, or corrosion. Use a pencil eraser or a cotton swab dipped in rubbing alcohol to clean them and allow them to air dry. What Can I Use to Charge the Battery of My XOSS G/G+? Micro USB Cable. We recommend avoiding inexpensive off-brand chargers. Can I Replace the Rechargeable Battery in My XOSS G/G+? XOSS G/G+ features a rechargeable, lithium-ion battery that is not user replaceable.

Last updated on Jul 12, 2023

Data Fields

XOSS G First page: SPD(CURRENT SPEED);TIME(TIME);DISTANCE(DISTANCE) Second page: AVG(AVERAGE SPEED);ALT(ALTITUDE);GRD(GRADE) Third page: MAX(MAX SPEED);CLOCK(CLOCK);ODO(ODOMETER) XOSS G+ First page: SPD(CURRENT SPEED);HR(CURRENT HEART RATE); CAD(CURRENT CADENCE); TIME(TIME);DISTANCE(DISTANCE) Second page: AVG(AVERAGE SPEED);AVG(AVERAGE HEART RATE); AVG(AVERAGE CADENCE);ALT(ALTITUDE);GRD(GRADE) Third page: MAX(MAX SPEED); MAX(MAX HEART RATE); MAX(MAX CADENCE); CLOCK(CLOCK); ODO(ODOMETER) Current Speed: The current rate of workout. Current Heart Rate: Your heart rate in beats per minute (bpm). Your device must be connected to a compatible heart rate monitor. Current Cadence: The number of revolutions of the crank arm. Your device must be connected to a cadence sensor for this data to appear. Time: The total time recorded. For example, if you start the timer and ride for 10 minutes, then stop the timer for 5 minutes, then start the timer and ride for 20 minutes, your total time is 35 minutes. Distance: The distance traveled for the current workout. Avg Speed: The average speed for the current workout. Avg Heart Rate: The average heart rate for the current workout. Avg Cadence: The average cadence for the current workout. Altitude: The altitude of your current location above or below sea level. Grade: The calculation of rise (elevation) override (distance). For example, for every 3 m (10 ft.) you climb you workout 60 m (200 ft.), and the grade is 5%. Max Speed: The top speed for the current workout. Max Heart Rate: The top heart rate for the current workout. Max Cadence: The top cadence for the current workout. Clock: The time of day based on your current time settings (time zone). Odometer: A cycling tally of distance traveled for all workouts. This total does not clear when resetting the trip data.

Last updated on Jul 12, 2023

Device Settings For XOSS G/G+

Device Settings In Bike Computer XOSS G The function of the Button Left Button: Long Press: End recording Short Press: Start/Pause/Resume Right Button: Long Press: Power on/off Short Press: Switch data display Long press the left and right buttons together(Power on the state): Enter the setting interface GPS icon： Short press the left button after turning on, the GPS icon appears and starts to flash. GPS appears solid with a BEEP prompt to indicate the device is ready. Up and down triangles on the device screen: The up triangle means your speed is higher than the average speed, and the down triangle means your speed is lower than the average speed. Device Settings Note: It can be set whether it is in recording or has ended. 1. Long press the right button to turn on the device 2. Long press both buttons to enter the setting interface 3. [Metric/Imperial] [Time Zone]Settings Metric/Imperial Setting(P1): Press the left button to switch between metric and imperial, and short press the right button to switch to P2. Time Zone Setting(P2): Press the left button to set a number or option, and press the right button to switch. - The device sets the time zone, not the current time - The supported time zone range is: -12:45 to 14:45 - Only for the workout after the setting takes effect After setup, long press the right button to exit the settings. XOSS G+ The function of the Button Left Button: Long Press: End recording Short Press: Start/Pause/Resume Right Button: Long Press: Power on/off Short Press: Switch data display Long press the left and right buttons together(Power on the state): Enter the sensor connection page, and continue to short-press the right button to enter the settings page. GPS icon： Short press the left button after turning on, the GPS icon appears and starts to flash. GPS appears solid with a BEEP prompt to indicate the device is ready. Up and down triangles on the device screen: The up triangle means your speed is higher than the average speed, and the down triangle means your speed is lower than the average speed. Device Settings 1. Long press the right button to turn on the device 2. Long press both buttons to enter the sensor connection page, short press the right button again, and enter into the "Tire Circumference" setting interface. 3. [Tire Circumference] [Metric/Imperial] [Time Zone]Settings Tire Circumference Setting(P1): Press the left button to set the number, and short-press the right button to switch to P2. - The unit of Tire Circumference is "mm" - Wheel Size and Circumference, learn more Metric/Imperial Setting(P2): Press the left button to switch between metric and imperial, and short press the right button to switch to P3. Time Zone Setting(P3): Press the left button to set a number or option, and press the right button to switch. - The device sets the time zone, not the current time - The supported time zone range is: -12:45 to 14:45 - Only for the workout after the setting takes effect After setup, long press the right button to exit the settings. Device Settings In XOSS APP Note: You can only access the settings page of the device in XOSS app after you have finished the record. After connecting XOSS G/G+ to the XOSS app, click Settings to modify the features below. XOSS G - User Profile - Backlight(Based on local sunrise and sunset times.) - Key Tone - Auto Pause - Units - Time Zone - Reset(You can restore the default configuration settings and workout profiles. This will not remove your workouts.) XOSS G+ - User Profile - Bike Profile(Only support setting one bicycle information.) - Backlight(Based on local sunrise and sunset times.) - Key Tone - Auto Pause - Units - Time Zone - Reset(You can restore the default configuration settings and workout profiles. This will not remove your workouts.)

Last updated on Apr 24, 2024